BC660

BC660 PCBA In-line Cleaning Machine

The BC660 PCBA in-line cleaning machine is mainly used for the automatic cleaning of residual flux on PCBA pads and surfaces. It adopts a sectional upper and lower spray cleaning method with the process of chemical fluid cleaning + DI water rinsing + hot air drying, which completely removes flux and ionic residues on PCBA and ensures it is thoroughly clean and dry. Machine Dimensions: L6600*W1800*H1700 (mm)

Equipment Characteristics:

1. Machine constructed from stainless steel material, resistant to acid and alkali corrosion, with a design service life of 20 years.
2. PC + PLC control system, with a Windows-based Chinese/English operating system.
3. Pre-wash section + Wash section; cleaning solution is circulated and filtered for reuse.
4. Pre-rinse section + Rinse section + Final spray rinse section; DI water overflows from the final stage backwards for continuous renewal.
5. High-pressure upper and lower spray cleaning; spray bar angle and spray pressure are adjustable.
6. Chemical isolation and air knife angle and pressure are adjustable.
7. Real-time monitoring of pressures for cleaning, rinsing, chemical isolation, and air knife.
8. Automatic detection of liquid and water leakage.
9. Automatic addition and discharge of cleaning solution.
10. Condensation and recovery of cleaning solution​ to reduce usage costs.
11. Cleaning solution cooling.
12. Rinse DI water resistivity monitoring​ and flow monitoring.
13. SMEMA signal line connection system​ for interfacing with upstream and downstream equipment.
14. Software for MES system integration​ to monitor machine operation (Optional).
15. Sensors equipped at inlet and outlet​ with board counting memory, overtime detection, and energy-saving standby functions.
16. Wastewater discharge device.
17. Electrical protections​ including power phase loss/sequence protection, equipment overcurrent/overload protection, and emergency stop protection.
18. High and low liquid level protection​ for both cleaning solution tank and rinse water tank.
19. Overtemperature protection​ for cleaning solution, rinse water, and hot air.
20. Triple-layer protection​ for washing and rinsing sections to prevent liquid/foam overflow, safeguarding the workshop environment.
21. Standard equipped energy-saving mode.
22. Real-time cleaning solution concentration monitoring and compensation device​ (Optional).